I was working on a Wishbone switch in this week. The switch would be able to pass data to either the downstream or the I/O device from the upstream. To design a Wishbone switch, it was crucial to understand all signals present in Wishbone. I would describe some Wishbone signals Read more…
Fourth week of internship. As Dr Shawn advised me to modify the repository, I had to study the code carefully so that I could be able to generate a correct top level verilog file for synthesis. To do so, it was crucial to understand std::map, as most of the important Read more…
In this week I was experimenting with Yosys. Yosys was a Verilog HDL synthesis tool. A synthesis would automatically convert a high-level representation of a circuit to that of a low-level representation. The behavioral design description would be an input for Yosys and it was able to generate a register-transfer Read more…
In this week, I was mainly dealing with Verilog. Verilog was a hardware description language (HDL) and it was used to describe a digital system. Firstly, I tested out a 8-bit simple up counter and ran it within the terminal. The code was comparable to Altera Quartus II. I had Read more…
On the first day of the internship, I set up my AESTE account and imported the PKCS#12 certificate into the chromium browser. As I started interacting with the linux environment, I spent some time reading through Linux commands online. Some of the most basic commands were shown below. cd: change Read more…