Last time, we faced the challenge of designing the circuit and hardware interfaces of our Spartan-6/PIC18 board. This week, we return for more work on the schematics and shift focus to a different aspect of our project: writing the firmware for the PIC18. My colleague, Jia Xien, has been busy Read more…
It turns out that the TCP/IP MDD Demo given by Microchip is not that useful. It mainly redefined all the functions to open webpages stored in SD cards instead. They did not modify the part where the original used to upload a file.But a file named “FileSystem.c” is particularly useful Read more…
That’s RIGHT! I am the daring kid who asked for a medical leave on my first day of work! As an advice to all other interns or future-interns, never do what I have done! Despite of all the terrible things happening on my first day, I did carry on my Read more…
I’m still working on how to initialize Block RAMs using DATA2MEM software. I have managed to produce a bit file with initialized RAMs. What’s left is to write a linker script to suit our addressing space, write a C file to blink the LEDs using GPIOs and finally get this Read more…
“Welcome to Galois Field F(2m) where elements are made up and carry doesn’t matter” If this sounds familiar you should probably turn off TV sometimes (or youtube). Nothing much was happening this week, I mostly spent it struggling with understanding and at later stage designing the ECDSA module. Man, Read more…
This week wasn’t very productive on the first few days as I can say. Has been working on source code that is to build a basic processor class in Java. Although the name of it is so called a BASIC processor class but unfortunately it isn’t 100% fall on the “basic” Read more…
My task for this week is to determine the interface of the remoteproc framework. As shameful as I could be, I still couldn’t figure out the interface and what is needed to make the framework runs. After some discussions with my supervisor, I was told that my work method was Read more…
My new task is to design the SOC for the current product that we are working on. However, before getting to the actual design there is few tasks that need to be done first. Last week the task was to connect the AEMB2 processor to two block RAMS, one for Read more…
The PICDEM.NET 2 has a stand-alone Ethernet controller, ENC28J60 but the project is not going to use that stand-alone Ethernet controller. The project will use the Ethernet driver for the PIC18F97J60, which is the ETH97J60. It is interesting to note that the PICDEM.NET 2 has two Integrated Connector Modules (ICMs), Read more…
After some more thought and discussion with my supervisor, it was decided that we should program the Spartan-6 FPGA using the Slave Serial method. This would be slightly easier to implement and is closer to the original design brief, which is to have a master PIC18 and slave Spartan-6 during Read more…