Finalizing continues with the SPI. I have previously made a few changes in SPI while integrating it with the system but I hadn’t verified the functionality of SPI after those changes. The most notable change was that one of my if statements was mistakenly inferring a latch. The if statement Read more…
The week was spent in continuing the ground work done on the Synchronous USART to optimize the Reading process which will subsequently program the FPGA. After solving the problem faced in the week before, time was spent in trying to get the SD card to read the bitstream data as Read more…
This week and the coming one will all be about finalizing, testing and documenting everything. This needs to be done for all t3pi I/O devices. In addition, there is a few bugs in c3rdas accelerators that need to be solved. Currently I’m writing my technical report about my internship. I Read more…
The project becomes closer to completion with the top level creator being as done as possible. In this post I’ll start by explaining the top level creator and it’s awkward status of being “as done as possible”. Next, I’ll try to make the big picture of our project clearer by Read more…
The optimization of the firmware continued with the focus being on the SD card reading stack. A look into the USART’s synchronous mode functionality was also taken to try and understand how that works. There was also a lot of time spent trying to set up scenarios to break the Read more…
Following the completion of the Ping-Pong Upload mechanism, its time to step forward to system optimization for the PIC firmware. This includes many separate portions looked into during the week to try to enhance the system performance and deliverable. The tasks include: i)optimization of the read/write functions ii) clearing up Read more…
My journey with C++ continues with three engines up and running. The bitgenerator, the software encoding bitstreams to suit our system. The software loader which runs data2mem to load the elf file into the RAM blocks on the bitstream. Last but nor least the synthesizer which runs Xilinx command line Read more…
As mentioned last week, the basic logic for the mechanism was devised within the PIC but it needed to be integrated to store and receive information on where the correct version of the file is saved onto the SD card from the card’s MBR itself. The biggest challenge to this Read more…
For a short period of time I’ll be writing a couple of C++ programs to do some tasks in our project. The first of them is what took my time this week and it’s more or less playing around with a bit stream. In this post I’ll explain what are Read more…